TIRE
TECHNOLOGY
MARSHAL
SUPPORT
DEALER LOCATOR
PASSENGER CAR
SUV / VAN
TRUCK & BUS
WINTER TIRE
SPECIALITY
TIRE SEARCH
R&D
MARSHAL TECHNLOGY
EU LABELING REGULATION
TIRE KNOWLEDGE
TIRE INFLATION PRESSURE CONTROL
TIRE REPAIR AND SAFETY
TIRE REPLACE
VISUAL INSPECTION
TIRE ALIGNMENT AND WHEEL BALANCE
RUN FLAT TIRE AND NEW CONCEPT SYSTEM
INCH-UP GUIDE
BRAND STORY
BRAND IDENTITY
PRESS
CONTACT US
WARRANTY SYSTEM
TBR WARNING
FAQ
MARSHAL
KUMHO TIRE Countries' & Regional Network
OFFICIAL SITE
ENGLISH
SPANISH
Asia Pacific
korea
china
japan
vietnam
australia
thailand
Europe
germany
uk
spain
austria
russia
poland
france
italy
SWEDEN(EN)
AMERICA
usa
canada(EN)
canada(fr)
brazil
MIDDLE EAST & AFRICA
egypt
DEALER SITE
ASIA PACIFIC
Thailand(Marshal)
EUROPE
czech
slovenia
TIRE
PASSENGER CAR
SUV / VAN
TRUCK & BUS
WINTER TIRE
SPECIALITY
TIRE SEARCH
TECHNOLOGY
R&D
MARSHAL TECHNLOGY
EU LABELING REGULATION
TIRE KNOWLEDGE
MARSHAL
BRAND STORY
BRAND IDENTITY
PRESS
CONTACT US
SUPPORT
WARRANTY SYSTEM
TBR WARNING
FAQ
DEALER LOCATOR
WARRANTY SYSTEM
TBR WARNING
FAQ
TBR WARNING
TBR WARNING
NOTE THESE ARE SAFETY PRECAUTIONS, NOT INTRODUCTIONS ON HOW TO MOUNT TIRES.
Only trained and experienced tire service personnel should undertake this hazardous work.
Always deflate tires completely before removing lock ring or side ring.
Always inspect and clean all rim parts before assembly.
Never use cracked, bent, dented, or badly rusted rim parts.
Always be sure that rim diameter and tire diameter are the same.
Always use new tubes and new flaps in new tires.
Always lubricate the base of the tube, the flap and beads as directed. Use only an approved lubricant.
Always ensure the tire interior is dry before mounting. Moisture inside a tire can damage the tire.
Never exceed 40 P.S.I to seat tire beads.
Always inflate tires in a safety cage or other restraint device.
Always use a clip-on chuck with gauge and an extension hose to inflate tires and stand away from the tire and rim while inflating.
After beads are seated, install valve core and inflate to recommended cold operating pressure.
X
INFO
1. Breite
2. Querschnitt
3. Felgendurchmesser
4. Tragfähigkeit
5. Geschwindigkeit
X
Serial Number Reference
X